COUNTRY WOOD FLOORING (CWF)
Installation Instructions and Maintenance Guide
Warning! Please read this instruction carefully before installation. If you need assistance regarding installation or have any questions, contact the dealer who you bought the material from or CWF immediately. Also noted that the warranty will void if this instruction is not properly followed.
Important Notes:
1. Wood Floors, being a natural product, containing natural variations in color, tone, and graining, it will also (1) continue to expand or contract during seasons changing. Some minor separation between boards might occur during the years. (2) change of color, gloss level due to exposure to sunlight or UV rays. These are not covered by CWF’s warranty.
2. Installed wood floors must be maintained in a year-round living condition, as room temperature of 60-80 'F and humidity level range of 35-50% is recommended, using air conditioners, humidifiers or dehumidifiers as appropriate. Fail to keep this year-round living condition will void the warranty.
3. Prior to installation, the installer / homeowner should inspect all material of color, grade, size, quality, or any visible defects and determine if it matches the work order. CWF declines any responsibility for materials with visible defects once they are installed. DO NOT INSTALL IT if you think the material is not acceptable, but contact CWF or its dealer/retailer immediately. Also noted that the installer should use reasonable selectivity to cull out or cut off unacceptable pieces, and the industry standard allows up to 5% of defects.
4. It is the responsibility of the installer and the homeowner to determine if the job site sub-floor and job site conditions are environmentally acceptable for the installation of CWF' Floors. CWF declines any responsibility for failure resulting from or connected with sub-floor, or job site damage, or deficiencies after floors has been installed.
5. CWF makes no warranty or guarantee of the quality of the chosen installer's work or of a particular installation performed by them. CWF disclaims all liability for any errors or improprieties in the installation of its products by an installer.
Maintenance:
Important:
Do not Wax! No Damp Mop!
Daily Cleaning:
Remove loose dirt and grit, use dust
mop, broom sweep, electric broom.
Footprints and dirt can easily be
wiped away with a moist cloth. Wipe up
liquid or food spills promptly with
dry cloth or paper towels. Remove
sticky residue (like jelly) with a
slightly dampened cloth. For general
cleaning, add 1/4 cup of white vinegar
to 1 quart of warm water. Dip a clean
cloth or sponge mop and wring nearly
dry. Clean floor and wipe dry with a
towel as you go. You may use other
leader brands of Hard Wood Flooring
cleaner applied ONLY for PRE-FINISHED
(MANUFACTURER FINISHED) HARDWOOD
FLOORING. Do not use ammonia or
oil-based wax, polish, abrasive
cleaners, or furniture cleaners. Use
mats in areas subject to high traffic
or regular dirt wear such as kitchen,
hallways and entryways. Fit furniture
legs with felt tips. Rolling furniture
should be fixed with soft rubber chair
casters. Periodically rearranging your
furniture / area rug and closing the
curtains during intense periods of
sunlight can help you to reduce color
change or fade of wood floor.
How to obtain the Installation/Maintenance Guides:
Installation/Maintenance Guides are enclosed in the boxes with the flooring material
Email or call CWF for a copy
Could be also download here:(PDF
files)
|